Field Manual

Movement Standards

Open an illustrated movement standard to check what counts, what to correct, and which options keep the movement’s purpose.

Browse movement groups
  • Olympic Weightlifting 2
  • Gymnastics 7
  • Conditioning & Mixed Modal 5

Foundational Strength

6 movements · educational training standards

01

Air Squat

Air Squat — Illustrated movement sequenceIllustrated movement sequence

WHAT COUNTS AS A GOOD REP

Lower until the hip crease passes below the top of the knees, then return to a stable standing position with knees and hips extended.

Full breakdown +

Start position: Begin standing with feet in a comfortable squat stance, both feet supported and hips and knees extended.

Points of Performance

  1. Set a stance that allows full-foot contact and comfortable depth.
  2. Brace the trunk; descend with hips and knees bending together.
  3. Track knees in line with toes while hips pass below knee height.
  4. Drive through the whole foot and stand tall without over-arching.

Common Faults & Fixes

  • Heels lift — Shorten the range temporarily, adjust stance, and keep weight over midfoot.
  • Knees collapse inward — Slow the descent and actively track knees with toes.
  • Chest drops or back rounds — Brace earlier and use a controlled tempo before adding speed.

Rep-standard misses: Hip crease does not reach the prescribed depth, or hips and knees do not reach full extension at the finish. Knee tracking is a coaching issue unless the workout explicitly makes it a judging criterion.

Scaling: Adjust depth, use a target, or practice a supported squat when the prescribed depth cannot be controlled; modified range requires an approved version.

Adaptive considerations: Use the athlete-specific seated or supported leg pattern approved in the modification library; no automatic standing-to-seated rep equivalence.

02

Back Squat

Back Squat — Illustrated movement sequenceIllustrated movement sequence

WHAT COUNTS AS A GOOD REP

Squat until the hip crease is below the top of the knees, then return to a fully standing position while controlling the bar.

Full breakdown +

Start position: Stand with a securely racked barbell across the upper back and hips and knees extended.

Points of Performance

  1. Secure the bar across the upper back; create a stable grip and stance.
  2. Brace the trunk before every descent; keep pressure across the feet.
  3. Control the squat below parallel with knees tracking over the toes.
  4. Drive hips and shoulders up together and finish fully standing.

Common Faults & Fixes

  • Hips rise before chest — Reduce load and drive the upper back into the bar.
  • Knees cave inward — Control the descent and push knees in line with toes.
  • Depth disappears as weight rises — Use a lighter load that allows the prescribed squat depth.

Rep-standard misses: Insufficient depth; failure to reach standing extension; loss of control before the rep finishes.

Scaling: Reduce load, use goblet squat or approved supported variation to preserve squat range.

Adaptive considerations: An assisted standing squat or seated lower-body strength exercise may be appropriate after individual assessment; do not score as the same RX rep.

03

Front Squat

Front Squat — Illustrated movement sequenceIllustrated movement sequence

WHAT COUNTS AS A GOOD REP

Keep the bar supported at the shoulders, pass the hip crease below the top of the knees, and return to a fully standing finish.

Full breakdown +

Start position: Stand with the barbell supported securely on the front of the shoulders in a front-rack position, hips and knees extended.

Points of Performance

  1. Establish a stable front rack with the bar resting on the shoulders.
  2. Brace and maintain a reasonably upright torso through the descent.
  3. Keep heels grounded while knees follow the toes below parallel.
  4. Stand by driving through the legs; maintain the bar on the shoulders.

Common Faults & Fixes

  • Elbows fall and bar rolls forward — Improve rack setup and lighten the load until control returns.
  • Heels lift — Try a stable stance and ankle mobility work; reduce load if needed.
  • Upper back collapses — Brace harder, raise the elbows where possible, and slow the descent.

Rep-standard misses: Insufficient squat depth; incomplete standing extension; losing the bar from the supported rack before completing the repetition.

Scaling: Use a lighter bar, goblet squat, or supported squat as an approved substitution while maintaining the squat pattern.

Adaptive considerations: An individually prescribed seated or supported squat/press pattern may preserve part of the stimulus; coach assesses equipment, transfer needs and trunk control.

04

Overhead Squat

Overhead Squat — Illustrated movement sequenceIllustrated movement sequence

WHAT COUNTS AS A GOOD REP

Keep the load supported overhead while squatting until hip crease is below knee height, then return to full hip-and-knee extension with the implement stable overhead.

Full breakdown +

Start position: Stand tall with a barbell or approved implement held overhead in a stable, locked-out position.

Points of Performance

  1. Establish an overhead position with active shoulders and controlled grip.
  2. Brace ribs over pelvis and keep the bar balanced over the foot.
  3. Descend to approved depth without losing overhead control.
  4. Stand with hips and knees extended and the load stable overhead.

Common Faults & Fixes

  • Bar drifts forward — Press up actively and work within a controllable shoulder range.
  • Heels lift or weight shifts to toes — Adjust stance and reduce depth or load until balanced.
  • Excessive low-back arch — Brace the trunk and avoid forcing range beyond shoulder control.

Rep-standard misses: Failing agreed squat depth; not standing fully; losing overhead support before finishing.

Scaling: Reduce load; try a PVC overhead squat, front squat, or another approved lower-body pattern if overhead range is unavailable.

Adaptive considerations: Overhead loading may require supported seated pressing or another approved pattern; do not assume the full standing squat stimulus is reproduced.

05

Deadlift

Deadlift — Illustrated movement sequenceIllustrated movement sequence

WHAT COUNTS AS A GOOD REP

Lift the bar from floor to an upright standing position with hips and knees extended and shoulders under control; return bar to floor between prescribed floor-start reps.

Full breakdown +

Start position: Begin with bar on floor, both hands gripping it, feet stable, and the trunk braced.

Points of Performance

  1. Start with the bar over midfoot and establish a firm grip.
  2. Brace the trunk and engage the upper back before breaking the floor.
  3. Push the floor away while keeping the bar close to the legs.
  4. Finish tall with hips and knees extended; lower with control.

Common Faults & Fixes

  • Bar swings away — Keep the bar over midfoot and tighten the upper back.
  • Hips shoot up immediately — Reset the start position and drive the floor away with the legs.
  • Back position or lockout breaks down — Reduce the load; avoid jerking the bar or leaning back at the top.

Rep-standard misses: Failure to achieve complete standing lockout; bar does not start at required floor position; support, assistance, or hitching when prohibited by the workout standard.

Scaling: Reduce load, elevate starting position, use kettlebells or dumbbells if approved; do not substitute a partial-range rep for a full rep without permission.

Adaptive considerations: Seated pulling/hinging patterns need individualized setup and are not automatically counted as standard barbell deadlift reps.

06

Shoulder Press

Shoulder Press — Illustrated movement sequenceIllustrated movement sequence

WHAT COUNTS AS A GOOD REP

From a standing front-rack position, press the bar overhead without leg drive and finish with elbows, hips, and knees extended under control.

Full breakdown +

Start position: Stand with barbell in a secure front-rack position and hips and knees extended before the press.

Points of Performance

  1. Start with a secure front rack, straight legs, and braced midline.
  2. Press vertically while moving the head out of the bar path.
  3. Keep hips and knees still—no dip or leg drive in a strict press.
  4. Finish with elbows straight and bar balanced over the body.

Common Faults & Fixes

  • Knees dip to help — Reset and choose a weight you can strictly press.
  • Ribs flare and lower back arches — Squeeze glutes and keep ribs stacked over pelvis.
  • Bar travels far forward — Clear the face early and drive toward a stacked overhead position.

Rep-standard misses: Dipping or driving with the legs in a strict-press prescription; incomplete overhead lockout or required standing extension.

Scaling: Reduce load or use dumbbells, a neutral-grip press, or a seated strict press when approved.

Adaptive considerations: A seated press can be a strong upper-body alternative when individually selected; assess shoulder capacity and wheelchair stability.

Olympic Weightlifting

2 movements · educational training standards

07

Clean and Jerk

Clean and Jerk — Illustrated movement sequenceIllustrated movement sequence

WHAT COUNTS AS A GOOD REP

Starting from the prescribed floor or hang position, clean the bar to the shoulders, then drive it overhead in a jerk. Finish under control with elbows, hips, and knees extended and feet brought back in line before lowering.

Full breakdown +

Start position: Begin from the workout’s specified start or hang position.

Points of Performance

  1. Start balanced; drive through the legs while keeping the bar close.
  2. Receive the clean on the front shoulders and stand completely.
  3. Dip vertically, drive through the legs, and move under the bar.
  4. Stabilize overhead with elbows locked; bring feet in line to finish.

Common Faults & Fixes

  • Early arm pull on the clean — Stay patient through leg drive, then pull under the bar.
  • Dip tips forward in the jerk — Brace and lower straight down before an explosive drive.
  • Unstable overhead catch — Reduce load and practice foot placement and shoulder lockout.

Rep-standard misses: Failing to fully stand with the clean when required; pressing or re-dipping in a way the workout prohibits; incomplete overhead lockout; dropping before demonstrating control.

Scaling: Lower the load, practice clean + jerk separately, or use a suitable dumbbell variation when prescribed.

Adaptive considerations: Use an individually chosen upper-body press, clean pattern, or seated variation consistent with available grip, trunk control, and stability; the substituted standard must be defined.

08

Snatch

Snatch — Illustrated movement sequenceIllustrated movement sequence

WHAT COUNTS AS A GOOD REP

Move the bar from floor to a supported overhead lockout in one continuous lift and stand completely with load stable overhead.

Full breakdown +

Start position: Begin with barbell on the floor in a wider snatch grip and controlled setup.

Points of Performance

  1. Set a balanced start with a snatch-width grip and braced torso.
  2. Drive with the legs and guide the bar close to the body.
  3. Move under the bar with active shoulders and a stable receiving base.
  4. Stand tall before lowering; control the bar overhead throughout.

Common Faults & Fixes

  • Bar loops forward — Keep it closer through the pull and finish driving vertically.
  • Arms bend too early — Use the legs first and delay the turnover.
  • Unstable overhead position — Reduce load; improve receiving balance and shoulder control.

Rep-standard misses: Bar starts above floor; load fails to reach controlled overhead extension; athlete does not stand and stabilize the finish.

Scaling: Practice with PVC, light bar or approved hang/power variants; do not force overhead range when unsafe.

Adaptive considerations: Seated snatch-like high pulls or presses serve different purposes and need individually approved standards.

Gymnastics

7 movements · educational training standards

09

Pull-Up

Pull-Up — Illustrated movement sequenceIllustrated movement sequence

WHAT COUNTS AS A GOOD REP

Start at the required extended-arm hang and finish with the chin clearly above the horizontal plane of the bar. Follow the workout for strict, kipping, or other permitted variations.

Full breakdown +

Start position: Begin hanging from bar with elbows extended and feet free of supporting surfaces.

Points of Performance

  1. Begin from the prescribed full hang with hands securely on the bar.
  2. Engage shoulders and keep trunk tension through the pull.
  3. Bring the chin clearly over the bar, not merely toward it.
  4. Return to the required extended-arm start before the next rep.

Common Faults & Fixes

  • Shortened bottom range — Reset to the prescribed extended-arm hang.
  • Reaching chin forward without clearing the bar — Pull higher while keeping the head neutral.
  • Uncontrolled swinging — Improve shoulder engagement and control kip rhythm if permitted.

Rep-standard misses: Beginning next rep with bent elbows; chin failing to break plane; using support when not allowed.

Scaling: Use band assistance, jumping pull-ups, ring rows or strict pulling progressions under approved variants.

Adaptive considerations: Seated cable/band rows or supported pull-downs can provide upper-body pulling work; do not claim RX pull-up equivalence.

10

Chest-to-Bar Pull-Up

Chest-to-Bar Pull-Up — Illustrated movement sequenceIllustrated movement sequence

WHAT COUNTS AS A GOOD REP

Begin with arms extended and make the prescribed chest-to-bar contact, usually at or below the collarbone as defined by that workout. Follow any strict or kipping requirements.

Full breakdown +

Start position: Hang from pull-up bar with arms extended and no foot support.

Points of Performance

  1. Start in the required hang with elbows extended.
  2. Coordinate core and shoulder movement for a strong high pull.
  3. Pull the torso close enough to make the prescribed chest contact.
  4. Return under control to the required bottom position.

Common Faults & Fixes

  • Only the throat or chin reaches the bar — Aim for real chest contact at the workout-defined point.
  • Arms never fully extend — Reset the hang between scoring repetitions.
  • Losing tension during the swing — Keep a controlled trunk and shoulder rhythm before pulling.

Rep-standard misses: Chest not contacting bar; contact only with neck/throat; incomplete hang extension.

Scaling: Reduce range via standard pull-ups or a jumping/banded chest-to-bar progression only if specified.

Adaptive considerations: Seated high row can train strong pulling but is not chest-to-bar repetition for competition scoring.

11

Toes-to-Bar

Toes-to-Bar — Illustrated movement sequenceIllustrated movement sequence

WHAT COUNTS AS A GOOD REP

Raise feet until both toes/feet contact the bar together within prescribed contact area, then return to valid hang/start.

Full breakdown +

Start position: Begin in a hanging position with elbows extended and both feet behind the required starting vertical plane.

Points of Performance

  1. Use an active, controlled hang with shoulders engaged.
  2. Build a coordinated arch-to-hollow rhythm when kipping is allowed.
  3. Drive the legs up so both feet touch the bar together.
  4. Reset the feet behind the required starting plane before repeating.

Common Faults & Fixes

  • One foot touches before the other — Practice synchronized leg movement and controlled rhythm.
  • Swing grows without upward travel — Reduce kip size and prioritize trunk flexion.
  • Starting position is skipped — Return to the prescribed hang or plane each time.

Rep-standard misses: Only one foot contacting; no contact with bar; failure to reset to required starting position.

Scaling: Use hanging knee raises, knees-to-elbows or lying leg raises when approved.

Adaptive considerations: Seated trunk flexion or controlled band-assisted knee raises can train related functions; assess trunk support and grip endurance.

12

Handstand Push-Up

Handstand Push-Up — Illustrated movement sequenceIllustrated movement sequence

WHAT COUNTS AS A GOOD REP

Lower head to the stated legal contact surface, press back to fully extended elbows with stable finish, and meet any workout-specific heel/hand positioning rules.

Full breakdown +

Start position: Start inverted against wall (unless freestanding specified), arms extended and body controlled.

Points of Performance

  1. Set a stable hand base and controlled inverted alignment.
  2. Descend with elbows tracking safely and head moving to the target.
  3. Press strongly through shoulders to straight elbows.
  4. Demonstrate the specified top position and heel/hand lines.

Common Faults & Fixes

  • Head crashes to floor — Slow the descent; modify range or use appropriate padding.
  • Lower back over-arches — Brace the trunk and control the kip if allowed.
  • Top lockout or line is missed — Finish with straight elbows and verify event markers.

Rep-standard misses: No contact at bottom; elbows not fully extended at top; heels/hands outside event lines when lines are specified.

Scaling: Use pike push-ups, box-supported HSPU, elevated hand positions or strict dumbbell press as approved.

Adaptive considerations: Seated dumbbell/landmine pressing often preserves overhead effort; shoulder, neck and trunk considerations require individualized planning.

13

Bar Muscle-Up

Bar Muscle-Up — Illustrated movement sequenceIllustrated movement sequence

WHAT COUNTS AS A GOOD REP

Begin hanging with arms extended. Pull and transition the torso over the bar, then finish supported on top with both elbows extended. Allowable kipping and contact rules depend on the workout.

Full breakdown +

Start position: Begin from the workout’s specified start or hang position.

Points of Performance

  1. Begin from the required straight-arm hang and establish kip control.
  2. Use a strong high pull while keeping the bar close.
  3. Transition the chest over the bar with coordinated shoulder movement.
  4. Press into a stable support with both elbows straight on top.

Common Faults & Fixes

  • Asymmetric “chicken-wing” transition — Lower difficulty and practice even, supported turnovers.
  • Large looping swing away from bar — Refine kip timing and pull the bar toward the torso.
  • Collapsed support at the top — Build straight-bar dip strength before faster reps.

Rep-standard misses: Not beginning in the required hang; not getting over the bar; failing to extend both elbows on top; using a prohibited assistance or rollover.

Scaling: Chest-to-bar or strict pull-ups plus straight-bar dips; banded or low-bar transition drills only when explicitly approved.

Adaptive considerations: Select an accessible pulling and pressing combination according to shoulder capacity and equipment; judge that substituted task on its own standard.

14

Ring Muscle-Up

Ring Muscle-Up — Illustrated movement sequenceIllustrated movement sequence

WHAT COUNTS AS A GOOD REP

Begin hanging from the rings with elbows extended. Pull, transition above the rings, and finish in stable top support with both elbows extended; restrictions on kip and ring contact are workout-specific.

Full breakdown +

Start position: Begin from the workout’s specified start or hang position.

Points of Performance

  1. Start from the required hang with hands and shoulders controlled.
  2. Pull the rings close to the body while maintaining trunk tension.
  3. Turn through a tight transition over the rings.
  4. Finish in stable top support with both elbows extended.

Common Faults & Fixes

  • Rings drift far apart — Keep hands close during pull and transition drills.
  • Transition stalls below rings — Practice low-ring assisted turnovers and stronger pulling.
  • Shoulders collapse in the dip — Reduce difficulty and develop supported ring-dip control.

Rep-standard misses: Not achieving top support, failing to extend the elbows, using equipment or external help not permitted by the prescription.

Scaling: Ring pull-ups, ring rows, low-ring transitions, ring dips, or a coach-approved combination.

Adaptive considerations: Choose an individualized combination of pulling and pressing that accounts for stability, transfers, and available arm function; do not assume equivalence to ring reps.

15

Wall Walk

Wall Walk — Illustrated movement sequenceIllustrated movement sequence

WHAT COUNTS AS A GOOD REP

Start in the prescribed prone position, place feet on the wall, walk hands toward the designated inner marker, then reverse under control until hands return to the outer marker and the athlete reaches the prescribed finish position. Line measurements are workout-specific.

Full breakdown +

Start position: Begin from the workout’s specified start or hang position.

Points of Performance

  1. Start prone in the prescribed floor position with hands at the marks.
  2. Walk feet onto the wall and advance hands in short, controlled steps.
  3. Reach the specified inner line without losing trunk tension.
  4. Reverse the steps and meet the required outer line and finish.

Common Faults & Fixes

  • Hips sag and low back arches — Brace the abdomen; shorten the movement as needed.
  • Hands take oversized, unstable steps — Use deliberate small steps and keep weight under the shoulders.
  • Start/finish markers are missed — Set and verify both lines before the workout begins.

Rep-standard misses: Starting or ending in the wrong position; missing the required inner or outer hand marker; allowing feet to leave the wall earlier than the stated standard.

Scaling: Incline wall walk, shorter wall walk, wall-facing hold, plank walkout, or other coach-approved inversion prep.

Adaptive considerations: An individual shoulder/trunk stability or locomotion task may replace the wall walk, with an explicitly stated start, end, and measurement.

Conditioning & Mixed Modal

5 movements · educational training standards

16

Wall Ball

Wall Ball — Illustrated movement sequenceIllustrated movement sequence

WHAT COUNTS AS A GOOD REP

Squat to required below-parallel depth, then drive and release ball so it clearly contacts or passes through the workout-defined scoring target; maintain control/reset for next rep.

Full breakdown +

Start position: Begin standing with prescribed medicine ball held in front of torso and target identified.

Points of Performance

  1. Hold the ball in front of the torso with a stable stance.
  2. Squat below the required depth while balancing over the feet.
  3. Stand powerfully and transfer leg drive into the throw.
  4. Hit the prescribed target, then catch and reset smoothly.

Common Faults & Fixes

  • Arms do all the throwing — Use a strong hip-and-knee drive before release.
  • Squat becomes shallow as fatigue rises — Slow the cycle until required depth is repeatable.
  • Ball misses target repeatedly — Move to a consistent distance and aim before speeding up.

Rep-standard misses: Not reaching squat depth; ball misses target or does not reach required height; failing prescribed target contact.

Scaling: Use lighter ball, lower *approved* target, or front squat/press patterns if separately prescribed.

Adaptive considerations: Seated ball throws can emphasize explosive upper-body action; target height and rep count must be independently set and safely reachable.

17

Burpee

Burpee — Illustrated movement sequenceIllustrated movement sequence

WHAT COUNTS AS A GOOD REP

Lower until the chest and thighs contact the floor, then return to the prescribed standing, jumping, or target finish. A jump and overhead clap count only when specifically required.

Full breakdown +

Start position: Begin standing and move to the floor under control.

Points of Performance

  1. Move from standing to the floor with hands placed securely.
  2. Make the prescribed chest/thigh contact without crashing down.
  3. Bring feet under the body using a permitted step or hop.
  4. Finish with the exact standing, jump, or target action required.

Common Faults & Fixes

  • Falling uncontrolled onto the floor — Place hands first and lower with control.
  • Hips stay high and chest misses the floor — Adjust pace and reach the prescribed contact point.
  • Skipping a required finishing action — Check the workout-specific jump, clap, or target rule.

Rep-standard misses: Chest or thighs fail to make required floor contact, or the athlete omits the specific finish required by the workout.

Scaling: Step back/forward, elevate hands, or use no-jump burpees when approved.

Adaptive considerations: An adapted burpee may use wheelchair reach/press, bench transfers or supported floor options as individually defined; do not impose floor transfers.

18

Double-Unders

Double-Unders — Illustrated movement sequenceIllustrated movement sequence

WHAT COUNTS AS A GOOD REP

For each single jump, the rope must pass completely beneath the feet twice. The workout may specify whether a failed attempt interrupts counting.

Full breakdown +

Start position: Start with jump rope controlled in both hands and body positioned to skip.

Points of Performance

  1. Hold hands near the hips with shoulders relaxed.
  2. Create two complete rope passes per single vertical jump.
  3. Turn the rope mainly with wrists, not broad arm circles.
  4. Use repeatable jumps and keep the gaze forward.

Common Faults & Fixes

  • Arms drift wide — Bring hands near hips to preserve rope length.
  • Donkey-kicking or piking — Practice steady vertical jumps with feet together.
  • Rope catches during uneven rhythm — Slow down and rebuild consistent wrist timing.

Rep-standard misses: Only one rope pass; rope gets caught/does not clear twice; a pass made during a separate jump instead of the same jump.

Scaling: Use single-unders or a programmed ratio/other aerobic skill substitute; ratios are workout-specific, never universal.

Adaptive considerations: Seated rope-turn equivalents or upper-body cyclical work need an individualized measure because airborne foot clearance may not be possible.

19

Box Jump

Box Jump — Illustrated movement sequenceIllustrated movement sequence

WHAT COUNTS AS A GOOD REP

Take off from the prescribed side, land or step onto the box as permitted, and finish with hips and knees extended on top. Follow the workout for two-foot takeoff and step-down requirements.

Full breakdown +

Start position: Begin on the floor in front of a stable box of the prescribed height.

Points of Performance

  1. Face a stable box and confirm the prescribed height and approach.
  2. Take off as required and land with feet securely on the top.
  3. Absorb the landing with knees tracking in line with toes.
  4. Stand with hips and knees extended before stepping or jumping down.

Common Faults & Fixes

  • Landing with knees collapsing inward — Choose a lower box and control the landing.
  • Landing too deep or on the edge — Reduce height and aim for stable foot placement.
  • Skipping full extension on top — Stand tall and show control before descending.

Rep-standard misses: Not achieving full extension on top; stepping up when jumping is required; missing the prescribed start or finishing side.

Scaling: Use lower box, step-ups or other lower-body jump patterns when approved.

Adaptive considerations: Seated medicine-ball throws or chair-safe propulsion bursts may preserve power effort, but not a box jump rep; use selected adaptive standard.

20

Thruster

Thruster — Illustrated movement sequenceIllustrated movement sequence

WHAT COUNTS AS A GOOD REP

From the front rack, squat until the hip crease goes below the top of the knees, then drive the bar into one overhead finish with hips, knees, and elbows extended. Follow any workout-specific restrictions on pauses or clusters.

Full breakdown +

Start position: Begin with a barbell or prescribed implements supported in the front rack, feet stable.

Points of Performance

  1. Begin with the load in a stable front rack and feet grounded.
  2. Squat below the required depth with a braced trunk.
  3. Drive straight from the legs into the overhead press.
  4. Finish stacked with elbows, hips, and knees fully extended.

Common Faults & Fixes

  • Heels lift during the squat — Adjust stance, balance, and loading to stay grounded.
  • Arms press too early — Let the legs initiate the drive before finishing with arms.
  • Bar moves forward or back arches — Keep load close and ribs stacked at lockout.

Rep-standard misses: Not hitting squat depth; missing overhead lockout; pressing from a front rack without completing the required squat.

Scaling: Reduce load; choose dumbbell thrusters, wall balls or separately approved squat-and-press variants.

Adaptive considerations: Seated combination press and trunk/leg component may be chosen if appropriate, but needs its own rep and stimulus definition.

full Sent Project · Field Manual

Visuals are AI-created conceptual movement sequences intended for orientation, not verified technical demonstration photographs. Exact movement requirements, adaptive options, loads, target heights and permitted variations must be defined by the workout or event organizer. Technique faults are not automatically judged no-reps.

Not for everyone. Built for anyone willing to work.

Back to the Field Manual
0
Skip to Content
  f/s
  f/s
  f/s
  f/s